Technology

Solid construction

The door leaf of ISO sectional doors consists of fully foamed and FCKW-free PUR sections - 42 mm thick and 550 mm high with a metal thickness from 0,45 mm. Out- and inside are polyester end coated. 

Construction

  1. Polyester-end coating
  2. Polyester-primer
  3. Chrome coating
  4. Alu zinc coating
  5. Sheet-steel
  6. Alu zinc coating
  7. Chrome coating 
  8. Primer
  9. PUR-Hard foam core
  10. Steel support ribbon

 Convincing values

Wind load
for closed door without slip door

min. 450 N/m2 (Norm pr EN 12424, classification 2)

Thermal resistance
U-value for closed door ( 4 x 4 m) without slip door

  0,8 W/m2 (Norm pr EN 12428)

Water penetration
for a door with or without slip door

  70 PA (Norm pr EN 12425, classification 3)

Air permeability
for closed door with or without slip door

  ca. 8,5 m3/m2/h (Norm pr EN 12426, classification 2)

Everything heavy?Of course!

Between door elements are lintel-, bottom-, side and middle casing seals - they make sure that everything is heavy. They close precise the door and improve better conditions behind the door.                         

  

Safe locked?

The inner installed handle (manual doors) protect safe your property. Optional you can fit your equipment with a cylinder lock. 

Safety as highest principle

Our finger wedging protection and side intervation protection give a calm safety in all model series.

Well in the grasp

The handle graceful designed integrated into the front does not look good only, but is also extremely practical. It functions at the same time as footstep plate for manually operated doors.

Nobody comes near there 

Role holder covers and the intervention protection at the castor increases your security during the gate operation.